The professional adjustable Wraparound with a wide intonation range!

The ABM 302n is machined from a block of Bell Brass. It sounds and "sings" excellent. It supports your guitar with a lively tone and lot of sustain.

By adjustable saddles you achieve a perfect intonation. In addition, it is possible by 2 allen screws to enhance the entire intonation range of the bridge either! Due to the low height and wide intonation range, the bridge is compatible with the Gibson Melody Maker and LP Junior.

The wraparound 3024n can be used for both an angled, as for a straight installation.

Material: Bell Brass.

Finish: Nickel.

Delivery: 5/16 "bolts with large head and sockets, hex key and Protector Box.

Tip 1: We deliver our 3022 Wraparound with 5/16 " pin / sleeve, as required by the US standard. For Asian guitars but the M8 variant may be required (see accessories ABM 30208-L).

Tip 2: Normally, please do not replace the existing drive-in sleeves of your guitar. If you do not have an appropriate tool, this action could be difficult. In addition, the sleeves are often lacquered in. When removing the paint could tear. Our bushings have a standard outer diameter of 13mm. In sleeves vary depending on the manufacturer of the guitar strongly in outer diameter (10 to 13 mm). So we ask you first to ensure compatibility. The difference in sound is already enormously without bushing exchange.