The perfect sound tool for your PRS guitar (US specifications)

String spacing: 52 mm, 81 mm pin spacing, 10 "radius, 5/16" large head bolts, intonation fine setting by two allen screws possible so that the wraparound can be used for an angled or straight mounting.

The 3022 features our "Advanced String Guide", which goes from a round groove in a V-notch in order to prevent by a perfect string contact the sitar effect.

Note: This bridge fits just for PRS models by US standards.

Material: Bell Brass.

Finish: 24k Gold.

Scope of supply: 5/16 "large head bolts and bushes, hex wrench and protector box.

Tip1: We deliver our 3022 Wraparound with 5/16 " bolt/ sleeve combination, as it provides the US stock. For Asian guitars the M8 version may be required (see accessories ABM 30208).

Tip2: Normally, please do not replace the bushings from existing guitars. If you do not have an appropriate tool, this action could be difficult. In addition, the sleeves are usually lackquered in. When removing the paint could tear. Our bushings have got a standard outer diameter of 13mm. But they vary depending on the manufacturer of the guitar strongly in outside diameter (from 11 to 13 mm). So we ask you first to ensure compatibility. The difference in sound is already enormously without the bushing exchange.

Tip3: Please always use ABM pins for ABM Tailpiece! Bolts from third parties can cause problems.